PIERRE NATURELLE GRAIN FIN

PIERRE NATURELLE GRAIN FIN

[10x100x30mm (0.39x3.94x1.18in)]

291140

€ 27.3

excl. TVA et frais de livraison

Sharpening stone:
– recommended for curettes, chisels, and scalers.
– available in various grits (textures) and designs to meet a particular need.
– lubricate often with water or oil to avoid clogging the stone’s pores with metal particles.
– should be wiped and scrubbed after each use with a clean gauze to remove metal particles.
– can be ultrasonically cleaned to remove any lubricant and metal particles before sterilization.
– should be used alternating the areas used for sharpening to prevent “grooving” in the stone.

Note:
Sickle Scalers: sickle scalers have a pointed tip and, therefore, the stone is held straight as it nears the tip.
Curettes: curettes have a rounded toe, so the position of the stone is adapted to the rounded cross-section.

Sharpening evaluation:
Visual inspection of the instrument’s cutting edge:
– if the cutting edge is rounded and reflects the light, then it is blunt.
– if the cutting edge is edged and doesn’t reflect the light, then it is sharp.
Testing the instrument’s blade with the plastic Testing Stick:
– if it runs smoothly over the Testing Stick, then it is blunt.
– if it grabs into the Testing Stick and removes small fragments of the plastic, then it is sharp.
Natural stone rectangular fine mm10 x 30 x 100

Natural stone
Natural stone with a fine grit.
Rectangular-shaped stone used for sharpening.
Oil lubrication is recommended when using this stone, however this stone can also be lubricated with water.

  • Nom Instrument: [10x100x30mm (0.39x3.94x1.18in)]

126 en stock